Gas Engineers in Plymouth

No. In the UK, it is illegal for anyone to install, disconnect, or alter a gas appliance or gas pipework unless they are legally certified for domestic gas work. General plumbers can only handle wet water and waste pipes. Connecting a gas cooker without proper certification voids your home insurance and creates severe risks of gas leaks and carbon monoxide exposure. At Lina Plumbing & Heating, our qualified gas engineers safely install freestanding cookers, hobs, and dual-fuel ranges with full compliance documentation.

Yes, a CP12 Landlord Gas Safety Certificate is a legal requirement under the Gas Safety (Installation and Use) Regulations 1998. Every UK landlord renting residential accommodation, including HMOs and holiday lets, must have all gas appliances, flues, and pipework inspected by a certified gas engineer once every 12 months. We carry out thorough inspections across Plymouth and provide digital CP12 certificates on the same day for your records and your tenants.

If you smell gas or suspect a gas escape:

1. Do not operate light switches, power sockets, or electrical equipment, and do not smoke or strike matches.

2. Open doors and windows immediately to ventilate the area.

3. Turn off your emergency control valve (usually located next to your gas meter).

4. Evacuate everyone from the building and call the National Gas Emergency helpline immediately on 0800 111 999. Once the property is declared safe to enter, contact our emergency gas engineers using the number provided above to trace and repair the pipework leak.

Yes. We are certified to work on both Mains Natural Gas (NG) and Liquefied Petroleum Gas (LPG). If your home, rural cottage, park home, or holiday lodge around Plymouth, Dartmoor, or the South Hams relies on propane or butane gas bottles or bulk storage tanks, we handle LPG cooker conversions, regulator replacements, changeover valves, and full system safety checks.

A domestic gas fire should be serviced at least once every 12 months. Over time, dust, lint, and soot collect in burner ports and pilot assemblies, leading to incomplete combustion and hazardous carbon monoxide buildup. Our service includes burner cleaning, thermocouple checks, ignition testing, and a mandatory flue spillage smoke test to confirm dangerous exhaust fumes are safely leaving your home.

A gas tightness test checks your entire domestic pipework system for hidden leaks. Using a digital or water manometer connected to your gas meter or test point, our engineer pressurizes the system and monitors the reading over a set period. If pressure drops, it proves gas is escaping somewhere in the building. We then isolate sections of pipework to locate and repair the leak before repressurizing and certifying the installation.

A standard gas cooker or hob installation usually takes between 1 to 2 hours, provided existing pipework and bayonet fittings meet current safety regulations. This includes safely removing the old appliance, checking the stability bracket and clearances from flammable surfaces, fitting a new high-temperature hose, testing operating pressures, and conducting a gas tightness test before signing off the appliance.